SciELO - Scientific Electronic Library Online

 
vol.5 número2Influencia del microclima en el confort térmico y desempeño energético de las edificaciones: Evaluación numérica del asentamiento de un patrimonio históricoInfluencia de la geomorfología y el caudal en la calidad del agua del río Guano, Ecuador índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Digital Novasinergia

versão On-line ISSN 2631-2654

Resumo

VIERA, Paulina  e  ACERO, Mirian. Design of a mortar from the characterization of lime produced and marketed by 5 suppliers in Ecuador. Novasinergia [online]. 2022, vol.5, n.2, pp.158-173.  Epub 05-Jul-2022. ISSN 2631-2654.  https://doi.org/10.37135/ns.01.10.09.

Little is known about the applications and use of hydrated lime currently produced in Ecuador. The present research focuses its study on 6 samples of hydrated lime marketed locally. Their performance was determined based on the national standard NTE INEN 488 in masonry mortars. These initial tests made it possible to identify the lime with which the mortar with the highest compressive strength is obtained. We worked on a mortar design that incorporates this lime and reaches the resistance established by the NTE INEN 2518 standard. A mortar of 3.5 MPa at 28 days was cataloged in the standard as a type O mortar for use in non-load-bearing masonry and plastering. These results are expected to contribute to the knowledge of Ecuadorian lime and facilitate its incorporation in the construction of local buildings.

Palavras-chave : Artisanal lime; compressive strength; industrial lime; lime; lime mortar.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )