SciELO - Scientific Electronic Library Online

 
 número26Influencia del homogeneizado previo al laminado en frío en la microestructura del AA3003 índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingenius. Revista de Ciencia y Tecnología

versión On-line ISSN 1390-860Xversión impresa ISSN 1390-650X

Resumen

QUITIAQUEZ, William et al. Numerical analysis of flow pattern map of R600a in a collector/evaporator of a solar-assisted heat pump. Ingenius [online]. 2021, n.26, pp.111-121. ISSN 1390-860X.  https://doi.org/10.17163/ings.n26.2021.10.

This research work presents a detailed description of the flow patterns maps generated in a horizontal pipe of the collector/evaporator of a direct-expansion solar-assisted heat pump, using R600a refrigerant as working fluid. The study was performed in a pipe with an internal diameter of 3.8 mm and a length of 1000 mm, mass velocities varying between 197.59 and 267.26 kg·m−2 ·s−1 and heat flux between 72.83 and 488.27 W·m−2 ; during the experimental tests, an incident solar radiation between 0 and 652.9 W·m−2 was present. The Wojtan, Ursenbacher and Thome correlation was considered for the analysis and the model used does not require iterative calculations; moreover, it carries out a detailed analysis of the different zones present along the pipe. The predominant zones in this study are intermittent, annular and dryout, found in the five tests, however, due to the working conditions in all tests with the exception of test A, mist and stratified-wavy flow were found.

Palabras clave : Flow patterns; two-phase flow; heat transfer; R600a.

        · resumen en Español     · texto en Español     · Español ( pdf )