SciELO - Scientific Electronic Library Online

 issue26Evaluation of an experimental induced ignition engine under different gasoline author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand




Related links

  • Have no similar articlesSimilars in SciELO


Ingenius. Revista de Ciencia y Tecnología

On-line version ISSN 1390-860XPrint version ISSN 1390-650X


DEL POZO, Freddy G.  and  MAS-TORRENT, Marta. Rapid Convective Deposition at Nanoscale of Active Composite Materials for the Manufacture of Organic Field-Effect Transistors. Ingenius [online]. 2021, n.26, pp.9-16. ISSN 1390-860X.

Organic field-effect transistors based on composite materials has been manufactured using the rapid convective deposition technique. The manufacturing was carried out under environmental conditions (air, light and humidity). All manufactured transistors show a typical field-effect behavior with features of a p-type semiconductor, and exhibit field-effect mobilities around 10-2 cm2/V.s, fully comparable with transistors manufactured using thermal evaporation of the same active material. The deposition technique demonstrates that devices may be manufactured with high reproducibility and in all cases with a low threshold voltage of approximately 1V. Therefore, it is demonstrated here that rapid convective deposition can be used to manufacture organic fieldeffect transistors on large surface areas, showing high reproducibility among devices and high stability at environmental conditions

Keywords : Organic field-effect transistors; Rapid convective deposition; Composite Materials.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )