SciELO - Scientific Electronic Library Online

 
vol.8 número2Revisión bibliográfica de sistemas de control para gestión de micro-redes de energíaVisión artificial mediante el coeficiente de correlación para exámenes de retinoscopía índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Maskay

versão impressa ISSN 1390-6712

Resumo

LOPEZ VALENCIA, Andrés; WALTEROS LEON, Manuela  e  RIVADENEIRA PAZ, Pablo Santiago. Phenomenological Based Modelling for ATM-52 Spray Dryer employed on ceramic production process. Maskay [online]. 2018, vol.8, n.2, pp.67-74. ISSN 1390-6712.  https://doi.org/10.24133/maskay.v8i2.1087.

This article contains a verbal and mathematical description of drying process inside ATM-52 spray dryer for ceramic paste production. Through the application of a modeling methodology, it was defined as an objective to be able to describe, by means of a phenomenological basis, the temporal variation of humidity in the outlet stream of the ATM-52 spray dryer. This variable is the most critical in the process and it’s the most fluctuating to measure in real time and only laboratory methods are available to obtain measurements. To achieve the objective, a series of assumptions were made, allowing to describe the model by a set of differential ordinary equations, The most important assumption is that the mass transfer phenomena is significant when streams flow is in co-current. Once the set of equations were obtained, through physical-chemical relations of the process, parameters values were assigned and computational verification was applied. The model was validated using the values in steady state obtained from the real process.

Palavras-chave : model; mass and energy balances; spray drying; slurry; mass transfer.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )