SciELO - Scientific Electronic Library Online

 
vol.10 número2Influencia del tipo de bujía en la evaluación del comportamiento y emisiones en un motor de encendido provocado índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Enfoque UTE

versión On-line ISSN 1390-6542versión impresa ISSN 1390-9363

Resumen

GUALLPA, Miguel; SUATUNCE, José  y  CANCHIGNIA, Hayron. Time and yield on the sawing process of Eucalyptus globulus Labill, with circular and band saw. Enfoque UTE [online]. 2019, vol.10, n.2, pp.126-143. ISSN 1390-6542.  https://doi.org/10.29019/enfoqueute.v10n2.477.

In order to determine the times and performance in the transformation process of round wood to squared wood of Eucalyptus globulus, a research was carried using circular saw (sawmill A) and circular saw more band saw (sawmill B). The sizes of the samples were 210 and 205 logs. To know the conversion time of the logs, the return-to-zero method was used and in the yield the sawn volume was related to the roll volume of the logs. The result indicate a significant behavior, whose times when processing 1.000 pt (2.36 m 3) are of 112.73 with circular saw and 167.36 minutes by means of the circular saw system plus the band saw. With yields of 27.74% in the sawmill A and 48.84% in the sawmill B, means that for each cubic meter of round wood (m3. r) processed, 117 pt and 207 st of sawn wood were obtained respectively. Finally, in the sawmill A, as the diameter of the logs increases, the yield and productivity increase. However, in the sawmill B, the yield diminishes and the productivity showed a variable behavior, due to the different number of logs evaluated by diameter class in each factory.

Palabras clave : Sawmills; Eucalyptus globulus; sawn timber; saw type.

        · resumen en Español     · texto en Español     · Español ( pdf )