SciELO - Scientific Electronic Library Online

 
vol.9 número3Reducción de la variabilidad de un proceso de desmineralización de agua por intercambio iónico para la elaboración de bebidas gaseosas índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Enfoque UTE

versão On-line ISSN 1390-6542versão impressa ISSN 1390-9363

Resumo

NARVAEZ HIDALGO, Jorge Andrés  e  VINUEZA LOZADA, Alexy Fabian. Aerodynamic design of 100 KW blades for horizontal axis wind turbines located on the “Cerro Villonaco” zone. Enfoque UTE [online]. 2018, vol.9, n.3, pp.106-115. ISSN 1390-6542.  https://doi.org/10.29019/enfoqueute.v9n3.330.

In this paper, the design and aerodynamic simulation of a rotor for horizontal axis wind turbine for the Cerro Villonaco was carried out. The aerodynamic design aimed for a blade with an optimal geometry, which is defined by the chord and the twist angle of the airfoil. The design parameters conferred to the project were given by the characteristics of the wind in the Villonaco Wind Farm. Results were validated with an aerodynamic simulation, developed in a software employing the mathematical model known as blade element momentum theory, to verify its optimum performance against the requirements established with a TSR, with the goal to set a design method for subsequent investigations. Finally, a rotor analysis was carried out, obtaining an output mechanical power of 107 KW, thus corroborating the design power with the characteristics of the Villonaco Wind Farm.

Palavras-chave : aerodynamic simulation; rotor; wind turbine; wind farm..

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )