Resumen

NARVAEZ HIDALGO, Jorge Andrés  y  VINUEZA LOZADA, Alexy Fabian. Aerodynamic design of 100 KW blades for horizontal axis wind turbines located on the “Cerro Villonaco” zone. Enfoque UTE [online]. 2018, vol.9, n.3, pp.106-115. ISSN 1390-6542.  https://doi.org/10.29019/enfoqueute.v9n3.330.

In this paper, the design and aerodynamic simulation of a rotor for horizontal axis wind turbine for the Cerro Villonaco was carried out. The aerodynamic design aimed for a blade with an optimal geometry, which is defined by the chord and the twist angle of the airfoil. The design parameters conferred to the project were given by the characteristics of the wind in the Villonaco Wind Farm. Results were validated with an aerodynamic simulation, developed in a software employing the mathematical model known as blade element momentum theory, to verify its optimum performance against the requirements established with a TSR, with the goal to set a design method for subsequent investigations. Finally, a rotor analysis was carried out, obtaining an output mechanical power of 107 KW, thus corroborating the design power with the characteristics of the Villonaco Wind Farm.

Palabras clave : aerodynamic simulation; rotor; wind turbine; wind farm..

        · resumen en Español     · texto en Español     · Español ( pdf )