SciELO - Scientific Electronic Library Online

 
vol.8 número2Evaluación de diferentes tratamientos físicos en pimiento Capsicum annuum L. verde y rojo mínimamente procesadoOptimización basada en Colonia de Hormigas aplicada al problema de Planificación de Celdas en redes de radio para sistemas de telefonía móvil índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Enfoque UTE

versión On-line ISSN 1390-6542versión impresa ISSN 1390-9363

Resumen

DIEGO, Núñez; BYRON, Núñez; HENRY, Vaca  y  MARITZA, Ureña. Influence of minimum quantity of lubricant MQL on tool life of carbide cutting tools during milling process of steel AISI 1018. Enfoque UTE [online]. 2017, vol.8, n.2, pp.44-55. ISSN 1390-6542.  https://doi.org/10.29019/enfoqueute.v8n2.157.

Nowadays, high productivity of machining is an important issue to obtain economic benefits in the industry. This purpose could be reached with high cutting velocity and feed rate. However, the inherently behavior produce high temperatures in the interface of couple cutting tool/workpiece. Many cutting fluids have been developed to control temperature in process and increase tool life. The objective of this paper is to compare the carbide milling tool wear using different systems cutting fluids: flood and minimum quantity of lubrication (MQL). The values of carbide milling cutting tool wear was evaluate according with the standard ISO 8688-1 1989. The experimental results showed that using MQL reduces significantly (about 40%) tool wear in milling AISI 1018 steel at industrial cutting conditions.

Palabras clave : Cutting fluids; minimum quantity of lubrication; tool life; milling..

        · resumen en Español     · texto en Español     · Español ( pdf )