SciELO - Scientific Electronic Library Online

 
vol.41 número2Modelamiento y Simulación de la Producción de Hidrógeno en un Electrolizador a Partir de Vapor Sobrecalentado de Agua índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Politécnica

versão On-line ISSN 2477-8990versão impressa ISSN 1390-0129

Resumo

CASA, E. et al. Numerical Modeling of Flush Flow in a Rapid Step Applying Computational Fluid Dynamics (CFD) Using Flow-3D. Rev Politéc. (Quito) [online]. 2018, vol.41, n.2, pp.53-64. ISSN 2477-8990.

The main objective of this project is to develop the numerical modeling of the skimming flow in a stepped spillway using FLOW-3D. The design of these structures is based on the use of empirical expressions obtained from physical modeling and complementary studies in the numerical modeling of flow over the stepped spillway with support of CFD code. The numerical model is used to estimate the flow velocity in the uniform region and the friction coefficient of the stepped spillway (ϴ = 45º, Hd=4.61m). The representation of auto aeration a flow is complex, so the program approximates the solution with certain limitations, using an air entrainment model; drift flux model and turbulence model k-ԑ RNG. The results obtained with numerical modeling and physical modeling at the beginning of natural auto aeration of flow and depth of the biphasic flow in the uniform region presents deviations above to 10% perhaps the flow is highly turbulent.

Palavras-chave : Stepped spillway; skimming flow; air entrainment; drift flux; numerical modeling; FLOW-3D.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )