SciELO - Scientific Electronic Library Online

 
vol.39 número1Determinación y Pruebas de los Requerimientos Mínimos Para Un Sistema De Data Link Para Aeronaves no TripuladasDeterminación del Torque y Potencia de un Motor de Combustión Interna a Gasolina Mediante el Uso de Bujía con Sensor de Presión Adaptado y Aplicación de un Modelo Matemático índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Politécnica

versão On-line ISSN 2477-8990versão impressa ISSN 1390-0129

Resumo

PAUL, Dávila; JAVIER, Orna; ANDRES, Rosales  e  EDUARDO, Ávalos. Design, construction of the mechanical structure and flight tests of a monitoring hexacopter for military applications. Rev Politéc. (Quito) [online]. 2017, vol.39, n.1, pp.37-48. ISSN 2477-8990.

The present research aims to perform the design and construction of a monitoring hexacopter. The drone has been made of carbon fiber, in order to obtain the lightest structure possible and increase the aircraft payload. In the design, the aerodynamic calculations were made in order to determine the required power for the rotors. For this reason, two theories were compared, the momentum theory and the propeller theory. After performing this analysis it was possible to determine which each engine required a power equal to 614,64 W. In order to fulfill the autonomy requirements, six LiPo batteries of 5000 mAh with six cells in order to get an output voltage of 22,2 V, have been used. This configuration has been allowed to obtain a continuous flight without load during 40 minutes.

Palavras-chave : Drone; hexacopter; carbon fiber.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )