Services on Demand
Journal
Article
Indicators
- Cited by SciELO
- Access statistics
Related links
- Similars in SciELO
Share
Enfoque UTE
On-line version ISSN 1390-6542Print version ISSN 1390-9363
Abstract
JUINA, Luis C.; CABRERA, Víctor H.; MORENO, Nancy V. and ANRANGO, Christian A.. Modeling and simulation of plastic deformation of Aluminium ASTM A1200 during mechanical conformed process. Enfoque UTE [online]. 2019, vol.10, n.1, pp.128-140. ISSN 1390-6542. https://doi.org/10.29019/enfoqueute.v10n1.375.
The research evaluates the behavior of a material when a plastic deformation occurs. The document describes the analytical process, finite elements and integrate process in order to develop shaped piece plan. Stress analysis and section variation were analyzed during the stuffing process. In the experimental part, the mechanical characteristics of the aluminum ASTM A1200 were determined (Yield strength was 214 MPa). The shaping process was carried out in a 5 tons press with pneumatic device. Several tests were executed with different depths in order to compare thicknesses with the physical model simulation. The maximum error was 3.67 % at 15 mm depth and the minimum of 0.24 % with the total depth. Respect to the efforts generated during the conforming, the maximum and minimum errors were 10.9 % and 2.18 % respectively.
Keywords : aluminium; conformed; strain; finite elements; simulation..