7 4 
Home Page  

  • SciELO

  • SciELO


Enfoque UTE

 ISSN 1390-6542 ISSN 1390-9363

MUNOZ, Marcelo; REINA, Jessica    ALDAS, María Belén. Evaluación de un reactor aerobio piloto con medio de soporte de polietilentereftalato (PET) para tratamiento de efluente lechero. []. , 7, 4, pp.31-42. ISSN 1390-6542.  https://doi.org/10.29019/enfoqueute.v7n4.112.

^a

Se instaló un reactor piloto de flujo pistón aerobio horizontal, con medio de soporte PET (polietilentereftalato), reciclado de botellas plásticas para el tratamiento de un sustrato sintético elaborado a partir de suero lácteo, con concentraciones de demanda química de oxígeno (DQO) entre 800 y 2100 mg/L. Se utilizó un inóculo bacteriano aclimatado con el afluente a tratarse. Se determinaron eficiencias de remoción de materia orgánica del 62.2%, 85% y 94%, operando con tiempos de retención de 5.14, 6.01 y 8.01 horas y trabajando con valores de cargas orgánicas volumétricas (Lv) de 7.68, 6.19 y 4.61 kg/día.m3, respectivamente. Adicionalmente, se calculó la constante cinética de transferencia másica (k), con un valor de 0.02 m/día y además, se determinó un factor de carga (F/M) de 0.4, indicando que el proceso se asemeja a un sistema de aireación prolongada. Finalmente, se realizó un análisis de la biomasa generada en el interior del reactor, obteniendo un valor de 11560 mg/L, el cual es mayor al valor de los sistemas convencionales.

^les^a

A pilot aerobic horizontal plug flow reactor filled with pieces of PET (polyethylene terephthalate), from plastic bottles was installed for treatment of a synthetic substrate prepared from lactic whey with COD values of 800 to 2100 mg/L. A bacterial inoculum previously acclimated to the substrate was used. Organic material removal efficiencies of 62.2%, 85% y 94% were obtained with retention times of 5.14, 6.01 and 8.01 hours, and with volumetric organic loads (Lv) of 7.68, 6.19 and 4.61 kg/day.m3, respectively. Also, the kinetic mass transfer constant (k) was calculated and it presented a value of 0.02 m/day. On the other hand, an F/M ratio of 0.4 was determined, indicating that the process had a similar performance to an extended aeration system. Finally, the biomass generated inside the reactor was analyzed, obtaining a value of 11560 mg /L, which is a higher value than those of conventional systems.

^len

: .

        · | |     · |     · ( pdf )